beautypg.com

4 show ip dvmrp nexthop, 5 show ip dvmrp prune – Fortinet MR1 User Manual

Page 382

background image

382

Nbr IP Addr This field indicates the IP Address of the DVMRP neighbor for which this entry contains
information.
State This field displays the state of the neighboring router. The possible value for this field
are ACTIVE or DOWN.
Up Time This field indicates the time since this neighboring router was learned.
Expiry Time This field indicates the time remaining for the neighbor to age out. This field is not
applicable if the State is DOWN.
Generation ID This is the Generation ID value for the neighbor.
Major Version This shows the major version of DVMRP protocol of neighbor.
Minor Version This shows the minor version of DVMRP protocol of neighbor.
Capabilities This shows the capabilities of neighbor.
Received Routes This shows the number of routes received from the neighbor.
Rcvd Bad Pkts This field displays the number of invalid packets received from this neighbor.
Rcvd Bad Routes This field displays the number of correct packets received with invalid routes.

7.1.1.4 show ip dvmrp nexthop

This command displays the next hop information on outgoing interfaces for routing multicast
datagrams.

Syntax

show ip dvmrp nexthop

Default Setting

None

Command Mode

Privileged Exec

User EXEC

Display Message

Source IP This field displays the sources for which this entry specifies a next hop on an outgoing interface.
Source Mask This field displays the IP Mask for the sources for which this entry specifies a next hop on an
outgoing interface.
Next Hop Interface This field displays the interface in slot/port format for the outgoing interface for this next
hop.
Type This field states whether the network is a LEAF or a BRANCH.

7.1.1.5 show ip dvmrp prune

This command displays the table listing the router’s upstream prune information

.

Syntax

show ip dvmrp prune