Fortinet MR1 - Manual (Page 296)

296
Syntax
queue cos-queue min-bandwidth all …
no queue cos-queue min-bandwidth all
… - Each Valid range is (0 to 100) in increments of 5 and the total sum is less
than or equal to 100.
no - This command restores the default for each queue's minimum bandwidth value in the device.
Default Setting
None
Command Mode
Global Config.
5.14.2.5 queue cos-queue strict
This command activates the strict priority scheduler mode for each specified queue on a
"per-port" basis.
Syntax
queue cos-queue strict [ … ]
no queue cos-queue strict [ … ]
no - This command restores the default weighted scheduler mode for each specified queue on a
"per-port" basis.
Default Setting
None