4 interface, 5 speed-duplex – Fortinet MR1 User Manual
Page 60
60
Display Message
Packets Received Without Error: The total number of packets (including broadcast packets and
multicast packets) received by the processor.
Broadcast Packets Received: The total number of packets received that were directed to the broadcast
address. Note that this does not include multicast packets.
Packets Received With Error: The number of inbound packets that contained errors preventing them
from being deliverable to a higher-layer protocol.
Packets Transmitted Without Error: The total number of packets transmitted out of the interface.
Broadcast Packets Transmitted: The total number of packets that higher-level protocols requested to be
transmitted to the Broadcast address, including those that were discarded or not sent.
Transmit Packet Errors: The number of outbound packets that could not be transmitted because of
errors.
Address Entries Currently In Use: The total number of Forwarding Database Address Table entries now
active on the switch, including learned and static entries.
VLAN Entries Currently In Use: The number of VLAN entries presently occupying the VLAN table.
Time Since Counters Last Cleared: The elapsed time, in days, hours, minutes, and seconds since the
statistics for this switch were last cleared.
5.2.1.4 interface
This command is used to enter Interface configuration mode. To configure a VLAN
interface, use the interface vlan command (see page 128).
Syntax
interface
Default Setting
None
Command Mode
Global Config
5.2.1.5 speed-duplex
This command is used to set the speed and duplex mode for the interface.
Syntax