Fortinet MR1 User Manual

Page 489

Text mode
Original mode

489

1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory
default is 1000 centiseconds (10 seconds).

Configuring the whole Switch GARP Configuration Page

Note: It can take up to 10 seconds for GARP configuration changes to take effect.

Configurable Data

GVRP Mode - Choose the GARP VLAN Registration Protocol administrative mode for the switch by
selecting enable or disable from the pull down menu. The factory default is disabled.

GMRP Mode - Choose the GARP Multicast Registration Protocol administrative mode for the switch by
selecting enable or disable from the pull down menu. The factory default is disabled.

Command Buttons

Submit - Update the switch with the values you entered. If you want the switch to retain the new values
across a power cycle you must perform a save.