Fortinet MR1 - Manual (Page 220)

220
5.8.5.3 tacacs server-ip
This command is used to configure the TACACS server IP address.
Syntax
tacacs server-ip <1-3>
no tacacs server-ip <1-3>
- An IP address.
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to remove the TACACS server IP address.
Default Setting
IP 0.0.0.0
Command Mode
Global Config
5.8.5.4 tacacs port
This command is used to configure the TACACS server’s service port.
Syntax
tacacs port <1-3> <1-65535>
no tacacs port <1-3>
<1-65535> - service port (Range: 1 to 65535).
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to reset port-id to the default value.
Default Setting
49