Fortinet MR1 - Manual (Page 292)

292
5.14.2 Configuration Commands
5.14.2.1 queue cos-map
This command maps an 802.1p priority to an internal traffic class on a "per-port" basis.
Syntax
queue cos-map <0-7> <0-6>
no queue cos-map
< 0-7 > - The range of queue priority is 0 to 7.
< 0-6 > - The range of mapped traffic class is 0 to 6.
no - Reset to the default mapping of the queue priority and the mapped traffic class.
Default Setting
None
Command Mode
Interface Config.
This command maps an 802.1p priority to an internal traffic class for a device.
Syntax
queue cos-map all <0-7> <0-6>
no queue cos-map all
< 0-7 > - The range of queue priority is 0 to 7.
< 0-6 > - The range of mapped traffic class is 0 to 6.
no - Reset to the default mapping of the queue priority and the mapped traffic class.
Default Setting
None
Command Mode
Global Config.