beautypg.com

6 show policy-map interface – Fortinet MR1 User Manual

Page 278

background image

278

DiffServ Admin Mode The current setting of the DiffServ administrative mode. An attached
policy is only active on an interface while DiffServ is in an enabled mode.

The following information is repeated for interface and direction (only those
interfaces configured with an attached policy are shown):

Interface
The slot number and port number of the interface (slot/port).

Direction The traffic direction of this interface service.

OperStatus The current operational status of this DiffServ service interface.

Policy Name The name of the policy attached to the interface in the indicated direction.

5.12.5.6 show policy-map interface


This command displays policy-oriented statistics information for the specified interface and
direction.

Syntax

show policy-map interface in

<slot/port> specifies a valid slot number and port number for the system. The direction
parameter indicates the interface direction of interest.

Command Mode

Privileged EXEC

Display Message

Interface The slot number and port number of the interface (slot/port).

Direction The traffic direction of this interface service, either in or out.
Operational Status The current operational status of this DiffServ service interface.

Policy Name The name of the policy attached to the interface in the indicated
direction.

Interface Offered Octets/Packets A cumulative count of the octets/packets offered to this
service interface in the specified direction before the defined DiffServ treatment is applied.

Interface Discarded Octets/Packets A cumulative count of the octets/packets discarded by
this service interface in the specified direction for any reason due to DiffServ treatment.

Interface Sent Octets/Packets A cumulative count of the octets/packets forwarded by this
service interface in the specified direction after the defined DiffServ treatment was applied. In
this case, forwarding means the traffic stream was passed to the next functional element in
the data path, such as the switching or routing function or an outbound link transmission
element.