Fortinet MR1 - Manual (Page 494)

494
Configuring IGMP Snooping VLAN Page
Configurable Data
VLAN ID - Specifies list of VLAN IDs for which IGMP Snooping is enabled.
VLAN ID - Appears when "New Entry" is selected in VLAN ID combo box. Specifies VLAN ID for which
pre-configurable Snooping parameters are to be set.
Admin Mode - Enable or disable the Igmp Snooping for the specified VLAN ID.
Fast Leave Admin Mode - Enable or disable the Igmp Snooping Fast Leave Mode for the specified
VLAN ID.
Group Membership Interval - Sets the value for group membership interval of IGMP Snooping for the
specified VLAN ID. Valid range is (Maximum Response Time + 1) to 3600.
Maximum Response Time - Sets the value for maximum response time of IGMP Snooping for the
specified VLAN ID. Valid range is 1 to (Group Membership Interval - 1).Its value should be greater than
group membership interval value.
Multicast Router Expiry Time - Sets the value for multicast router expiry time of IGMP Snooping for
the specified VLAN ID. Valid range is 0 to 3600.
Command Buttons
Submit - Update the switch with the values you entered.