Fortinet MR1 - Manual (Page 585)

585
Defining RADIUS Accounting Server Configuration Page
Selection Criteria
Accounting Server IP Address - Selects the accounting server for which data is to be displayed or
configured. If the add item is selected, a new accounting server can be configured.
Configurable Data
IP Address - The IP address of the accounting server to add. This field is only configurable if the add
item is selected.
Port - Specifies the UDP Port to be used by the accounting server. The valid range is 0 - 65535. If the
user has READONLY access, the value is displayed but cannot be changed.
Secret - Specifies the shared secret to use with the specified accounting server. This field is only
displayed if the user has READWRITE access.
Apply - The Secret will only be applied if this box is checked. If the box is not checked, anything entered
in the Secret field will have no affect and will not be retained. This field is only displayed if the user has
READWRITE access.
Non-Configurable Data
Secret Configured - Indicates if the secret has been configured for this accounting server.
Command Buttons
Submit - Sends the updated screen to the switch and causes the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Remove - Remove the selected accounting server from the configuration. This button is only available to
READWRITE users. These changes will not be retained across a power cycle unless a save is
performed.
Refresh - Update the information on the page.