Fortinet MR1 - Manual (Page 284)

284
ACL Type This displays ACL type is IP or MAC.
ACL ID This displays the ACL ID.
Sequence Number This indicates the order of this access list relative to other access lists already assigned
to this interface and direction. A lower number indicates higher precedence order.
5.13.2 Configuration Commands
5.13.2.1 mac access-list extended
This command creates a MAC Access Control List (ACL) identified by , consisting of
classification fields defined for the Layer 2 header of an Ethernet frame. The
parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying the MAC access list. If a MAC ACL by this name already exists, this command
enters Mac-Access-List config mode to allow updating the existing ACL.
Syntax
mac access-list extended
no mac access-list extended
- It uniquely identifies the MAC access list.
Default Setting
None
Command Mode
Global Config
5.13.2.2 mac access-list extended
This command changes the name of a MAC Access Control List (ACL). The
parameter is the name of an existing MAC ACL. The parameter is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC
access list. This command fails if a MAC ACL by the name already exists.