Fortinet MR1 - Manual (Page 514)

514
Slot/Port - Selects the interface to be configured.
Configurable Data
Allow Port Security - Used to enable or disable the Port Security feature for the selected interface.
Maximum Dynamic MAC Addresses allowed - Sets the maximum number of dynamically locked
MAC addresses on the selected interface.
Add a static MAC address- Adds a MAC address to the list of statically locked MAC addresses for the
selected interface.
VLAN ID- Adds a corresponding VLAN ID for the MAC Address being added to the list of statically
locked MAC addresses for the selected interface.
Maximum static MAC Addresses allowed- Sets the maximum number of dynamically locked MAC
addresses on the selected interface.
Enable violation traps- Enables or disables the sending of new violation traps designating when a
packet with a disallowed MAC address is received on a locked port.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These changes will not
be retained across a power cycle unless a save configuration is performed.
Move - Convert a dynamically locked MAC address to a statically locked address. The Dynamic MAC
address entries are converted to Static MAC address entries in a numerically ascending order till the
Static limit is reached.