Fortinet MR1 - Manual (Page 28)

28
2 Installation and Quick Startup
2.1 Package Contents
Before you begin installing the switch, confirm that your package contains the following
items:
• One Fortinet FortiSwitch-100 Ethernet switch
• Mounting kit: 2 mounting brackets and screws
• Four rubber feet with adhesive backing
• One AC power cord
• This User’s Guide with Registration Card
• CLI Reference
• CD-ROM with User’s Guide and CLI Reference
2.2 Switch Installation
2.2.1 Installing the Switch Without the Rack
1. Install the switch on a level surface that can safely support the weight of the switch
and its attached cables. The switch must have adequate space for ventilation and for
accessing cable connectors.
2. Set the switch on a flat surface and check for proper ventilation. Allow at least 5 cm
(2 inches) on each side of the switch and 15 cm (6 inches) at the back for the power
cable.
3. Attach the rubber feet on the marked locations on the bottom of the chassis.
The rubber feet are recommended to keep the unit from slipping.