Intermec 6710 - Manual (Page 89)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-23
Bridge Options
Use [Bridge] to configure options that define the bridging
topology of the open wireless LAN. Options are:
Serial Num ber “(Unique 10-digit number.)”
Lan ID 0
[Root]
[Ports]
ARP Server Mode
Serial Number
Serial Number is a read-only setting that displays this
access point’s unique 10-digit serial number, which
identifies this unit on the network.
Lan ID
The LAN ID (also called domain) is a number that logically
isolates adjacent but independent open wireless LANs. The
prompt is:
Range is:
0..254
Following are ranges:
"
900 MHz and S-UHF radios: 0 (default) to 254.
"
WLIF radio: 0 to 15.
" NOTE: For mixed systems containing WLIF radios, you must use LAN ID 0
to 15.