Ip addresses, Type – Intermec 6710 User Manual
Page 149
SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-83
[IP Addresses]
The configuration screen for [IP Addresses] is:
Type
Address
1
0.0.0.0
2
0.0.0.0
3
0.0.0.0
4
0.0.0.0
5
0.0.0.0
6
0.0.0.0
7
0.0.0.0
8
0.0.0.0
Each line in the IP Addresses Table contains one IP address
entry. Settings are:
Type
Address
0.0.0.0
Type
The Type setting specifies the type of Ethernet MAC
address used by the super root when forwarding frames
through the OWL/IP port. This setting allows flexibility in
configuring OWL/IP routing. In most cases, IP and MAC
address types should match. The MAC frame type and IP
address in combination dictate how GRE encapsulated
frames are forwarded to IP routers. Settings are:
Unicast
Multicast
Broadcast