Intermec 6710 - Manual (Page 111)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-45
Frame Type Description
DIX--IP--TCP Ports
DIX--IP--UDP Ports
SNAP--IP--TCP Ports
SNAP--IP--UDP Ports
Primary Internet Protocol Suite
(IP) transport protocols.
DIX--IP--Other Protocols
SNAP--IP--Other Protocols
IP protocols other than TCP or
User Datagram Protocol (UDP).
DIX--IPX Sockets
SNAP--IPX Sockets
802.3--IPX Sockets
Novell NetWare protocol.
DIX--Other EtherTypes
SNAP--Other EtherTypes
DIX or SNAP registered protocols
other than IP or IPX.
802.2--IPX Sockets Novell running over 802.2 LLC.
802.2--Other SAPs SAPs other than IPX or SNAP.
" NOTE: Some IP protocol ports cannot be filtered because they are used for
configuration and management of the access point. These include
HTTP, Telnet, SNMP, and Internet Control Message Protocol (ICMP).
Filters set for these protocols are ignored for the Ethernet frame type
configured in the access point’s [Tcpip] menu.
Frame types have the following settings:
Action
Scope
Setting Description
Action Defines how the frame is processed:
Pass
(default)
Frame is passed to the bridging function
for further processing.
Drop Frame is discarded.