Intermec 6710 - Manual (Page 22)

SECTION 1
"
Preface
1-2 6710 Access Point User’s Guide
Section 3,
“Installation”
Helps you prepare your site before
you install the access point, and
shows how to connect the access
point to 10BASE-T, 10BASE2, and
10BASE5 Ethernet.
Section 4,
“Configuration”
Describes how to create a
communications session with the
access point, access FLASH and
ROM, and set up the access point
through its configuration menus.
Section 5,
“Software Download”
Describes file system methodology
and the functional characteristics
of the software download process.
Section 6,
“Indicator Lights”
Describes the access point’s
indicator lights and contains
troubleshooting tips.
Appendixes contain supplemental information:
Appendix A Lists mechanical, electrical, and
environmental specifications for
the access point.
Appendix B Lists specifications and antennas
for the WLIF radio.
Appendix C Lists specifications and antennas
for the 900 MHz radio.
Appendix D Lists specifications and antennas
for the synthesized UHF radio. It
also discusses UHF technology.
Appendix E Describes OWL/IP (IP tunneling).
Appendix F Shows port and cable pin-outs.
Appendix G Describes the 6710 Management
Information Base (MIB).
The glossary at the end of this manual lists network terms.