Intermec 6710 - Manual (Page 134)

SECTION 4
"
Configuration
4-68 6710 Access Point User’s Guide
The Slave access point synchronizes with Masters whose
channel and subchannel appear in the list of configured
Masters. Precedence is given by the order of the list.
Master 1 has highest precedence; Master 8 has lowest.
Channel and subchannel settings can be 0, where 0 means
“do not care.” For example:
"
You can set the Master 1 channel to 0 and subchannel
to 1. The Slave synchronizes with any Master on any
channel as long as the Master’s subchannel is 1.
"
You can set the Master 1 channel to 0 and subchannel
to 0, which means “do not care.” The Slave
synchronizes with any Master.
Remember that:
"
Any Master with which the Slave is allowed to
synchronize must have Wireless Hops enabled.
"
A Slave station must have a root priority of 0.
"
A Slave station must not be allowed to synchronize
with a Master connected to its own secondary LAN.
MAC Config
Use MAC Config options to enhance the performance of the
WLIF radio. Options are:
Default
Interference
Throughput
Manual
" NOTE: An inefficient MAC Config radio setting can adversely affect the
performance of your open wireless LAN. You should change MAC
Config radio settings only under the direct supervision of a Systems
Engineer.