Pcmcia lights – Intermec 6710 User Manual
Page 198
SECTION 6
"
Indicator Lights
6-6
6710 Access Point User’s Guide
PCMCIA Lights
PCMCIA indicator lights show the status of the two PC
card slots, which are labeled NIC1 and NIC2. The left light
shows the status of NIC1; the right light shows the status
of NIC2. Table 6-5 shows light indications for both ports.
Table 6-5
PCMCIA Indicator Lights
Status
Indication
OFF
A functional or enabled radio is not installed in the
slot.
ON
A functional and enabled radio is installed in the slot.
BLINK
Installed radio is active and has communicated with
a wireless station in the past 10 minutes.
When the access point reboots in ROM mode, the R-LINK,
W-LINK, NIC1, and NIC2 indicator lights show — for about
nine seconds — the DIAG port’s baud rate. The lights show
the status about eight seconds after the W-LINK light stops
blinking. Table 6-6 shows baud rates.
Table 6-6
DIAG Port Baud Rates, ROM Mode
R-LINK
W-LINK
NIC1
NIC2
Baud Rate
OFF
OFF
OFF
ON
2400
OFF
OFF
ON
OFF
4800
OFF
OFF
ON
ON
9600
OFF
ON
OFF
OFF
14400
OFF
ON
OFF
ON
19200
OFF
ON
ON
OFF
28800
OFF
ON
ON
ON
38400
ON
OFF
OFF
OFF
57600