Intermec 6710 - Manual (Page 51)

SECTION 3
"
Installation
6710 Access Point User’s Guide 3-7
Finding the Best Location
Site Survey
Intermec strongly recommends that Intermec or certified
providers conduct a site survey to determine the ideal
locations for all of your network components. A proper site
survey requires special equipment and training. A site
survey provides an installation recommendation that
addresses various factors, which can affect the performance
of your wireless LAN system.
General Installation Guidelines
Coverage in most sites requires a network of access points
to be installed. Radio coverage varies greatly with factors
such as building construction, number and type of
obstructions in the signal path, and the RF media in use.
Additional factors related to the intended use of the system
also dictate installation practices. The following general
practices should be followed in any installation:
"
Locate access points centrally within areas requiring
coverage.
"
Try to position the access point so its indicator lights
are visible. The lights are useful for troubleshooting
the installation.
"
Position antennas below roof trusses and away from
I-beams, racks, or other structures and obstructions.
"
Overlap access point coverage areas to avoid coverage
holes.
"
Install wired LAN cabling within node limit and cable
length limitations.