Intermec 6710 - Manual (Page 158)

SECTION 4
"
Configuration
4-92 6710 Access Point User’s Guide
Configuration Guidelines
Planning Your Installation
To plan your installation, refer to “Finding the Best
Location” in Section 3 for installation guidelines.
Using the Configuration Guide
The configuration guide in Table 4-1 summarizes the
necessary steps to set up an open wireless LAN. The
left-hand column provides basic setup information for a
simple network using 6710 Access Points on a single
Ethernet segment. This type of network may contain
bridges or hubs, but may not contain OWL/IP links through
routers, secondary LANs, or wireless access points. The
right-hand column provides additional steps for more
complex networks that include these additional
components.
Table 4-1
Configuration Guide
z = required step; Z = recommended step
Simple Network Advanced Functions
1. Configuration Planning
z
Select which access points will be
primary and fallback super root
candidates (page 4-24).
z
Secondary LANs and OWL/IP:
Select which access points will be
primary and fallback designated
bridges (pages 4-57 and 4-79).