Intermec 6710 - Manual (Page 318)

APPENDIX G
"
MIB
G-68 6710 Access Point User’s Guide
bsDetachReason OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Last detach reason code.
The code indicates the
reason that the AP became unattached for the last
occurrence.
0 - Initial Value,
1 - A new root node was detected,
2 - The network inactivity timer expired,
4 - A better path to the root was detected,
5 - The node’s parent became unattached,
7 - The node was in a detach list in a HELLO PDU,
8 - The node was functioning as the root and
relinquished the root status,
9 - The maximum number of attache retries was
exceeded without receiving an ATTACH response PDU,
900-90F - A MAC-D link error occurred while sending
a PDU to the parent node.”
::= { brgState 20 }
bsNetworkTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Distributed network time (.01 sec)”
::= { brgState 21 }
bsUniFloodLevel OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Flooding level for unicast frames (1-2)”
::= { brgState 22 }
bsMultiFloodLevel OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Flooding level for multicast frames (0-3)”
::= { brgState 23 }