Intermec 6710 - Manual (Page 201)

6710 Access Point User’s Guide A-1
Appendix A
Access Point Specifications
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
Product Specifications
Processor: AMD 29200 RISC
Memory: 4 MB RAM/2 MB FLASH ROM
Distribution LAN
compatibility:
ANSI/IEEE 802.3 (Ethernet communication
standard) and DIX Version 2.0
Interface: 10BASE2 (thinnet), 10BASE5 (AUI or
thicknet), and 10BASE-T (twisted pair)
through ports on bottom panel
Card slots: Two PC-card--compatible slots
Mounting options: Tabletop, wall, or ceiling
Electrical Specifications
The access point has one IEC connector for
industry-standard three conductor ac input. The access
point’s internal power supply automatically detects the
voltage level and frequency of the source power. Following
are source power specifications.
Voltages: Autosensing 100, 110, 220, 240 V ac
Frequency: 50 to 60 Hz
Safety: UL/CSA (Underwriters Laboratory/
Canadian Standards Association),
United States and Canada; CB
(Competent Body) report for Europe