Intermec 6710 - Manual (Page 142)

SECTION 4
"
Configuration
4-76 6710 Access Point User’s Guide
S-UHF Options
" NOTE: Appendix D provides additional information about the S-UHF radio.
Use [UHF] to set S-UHF radio options:
File Name “synuhf_d.29k”
Call Sign “”
Frequency (First frequency in list.)
Master Mode
Attach Priority
" NOTE: Attach Priority displays if Master Mode is set to Disabled.
File Name
File Name is the name of the radio’s driver software. Only
change this name when directed to do so by a Systems
Engineer. Normally, the program’s file name should not be
changed.
Call Sign
" NOTE: Ignore this option if your site is outside of the United States.
Call Sign displays your network’s callsign. The prompt is:
Range is:
12 chars
Agencies that allocate S-UHF frequencies, such as the
Federal Communications Commission (FCC) in the United
States, may require that this access point periodically
transmit a callsign.