Intermec 6710 - Manual (Page 319)

APPENDIX G
"
MIB
6710 Access Point User’s Guide G-69
bsIsPrimaryBridge OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
”TRUE, if the AP bridges to the distribution LAN”
::= { brgState 24 }
bsIsSecondaryBridge OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
”TRUE, if the AP is the designated bridge for
a secondary LAN”
::= { brgState 25 }
bsUniFilterExpr OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Unicast ethernet filter ID (0-255).
If the ID is
non-zero, it points to a user defined expression
which is used to filter unicast frames on the
ethernet port.”
::= { brgState 26 }
bsMultiFilterExpr OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Multicast ethernet filter ID (0-255). If the ID is
non-zero, it points to a user defined expression
which is used to filter multicast frames on the
ethernet port.”
::= { brgState 27 }
bridgeStats OBJECT IDENTIFIER ::= { nBridge 7 }
bstcRouteCount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Total route table entries”
::= { bridgeStats 3 }