Intermec 6710 - Manual (Page 237)

APPENDIX E
"
OWL/IP
6710 Access Point User’s Guide E-15
Step 1
"
Access points are assigned IP addresses for the
appropriate subnets.
"
Subnet 192.168.15.0 is designated as the home subnet,
since it contains the servers used by wireless stations.
"
Wireless stations that require IP connectivity are
given IP addresses on this subnet.
"
Access point (AP) 1 is selected as the primary super
root and assigned root priority 3.
"
AP 2 is selected as the fallback super root and
assigned root priority 1.
"
All other access points are configured to root priority
0.
Step 2
"
AP 4 is selected as the designated bridge for subnet
192.168.17.0 and configured with bridge priority 2.
"
AP 3 is configured as the fallback designated bridge
for that subnet, and configured with bridge priority 1.
"
Other access points on the subnet are configured with
bridge priority 0.
"
AP 5 is chosen as the designated bridge for subnet
192.168.23.21.
Step 3
The two super root candidates are configured to originate
tunnels. Two options are available: unicast addressing and
directed broadcast.