Intermec 6710 - Manual (Page 153)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-87
Advanced Password
When you set an advanced password, it is required to
configure the following:
Security/Advanced Password
and Bridge/Ports/omdip
The prompt is:
Range is:
16 chars
Enter 16 or fewer alphanumeric characters for this
password. It is case insensitive and can be any combination
of letters, numbers, and symbols. For security, the
password appears as asterisks on the screen.
Combining Radio Options
You can combine WLIF, 900 MHz, and S-UHF radios in a
common network by following basic guidelines for LAN ID.
Two alternatives are possible: same LAN ID and different
LAN IDs.
Same LAN ID
Using the same LAN ID for all radio options configures all
access points into a single network regardless of radio type.
This approach allows management of a single network
using the OWLView network management application.
An Ethernet path or wireless hop must exist from all access
points to the super root and back-up super root candidates.
In addition, globally distributed system parameters —
particularly flooding levels — must be appropriate for all of
the installed radio options.