Intermec 6710 - Manual (Page 84)

SECTION 4
"
Configuration
4-18 6710 Access Point User’s Guide
"
16 bits of network address.
"
5 bits of subnet address. Do not use all 0’s or all
1’s.
"
11 bits of host address. Do not use all 0’s or all
1’s.
The following chart lists IP addresses when the submask is
255.255.248.0.
Subnet First Address Last Address
1 172.16.8.1 172.16.15.254
2 172.16.16.1 172.16.23.254
3 172.16.24.1 172.16.31.254
.
.
.
30
172.16.240.1 172.16.247.254
If you are using DHCP to obtain an IP subnet mask for this
access point, the subnet mask obtained from DHCP
overrides the setting for the IP Subnet Mask option.
IP Router
" NOTE: The IP address of the router is required only if this access point will
communicate with devices on the other side of the router.
IP Router identifies the default router used to forward data
frames to addresses on another subnet. The prompt is:
Range is:
4 nums 0..255
The default is 0.0.0.0, which disables the ability to
exchange TCP/IP traffic with another subnet or network.