Intermec 6710 - Manual (Page 143)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-77
The callsign is granted as part of the FCC license process.
Insert the callsign from the FCC license certificate at the
callsign prompt.
Frequency
The Frequency option displays a list of frequencies
programmed at the factory. Some radios have multiple
frequencies. For example:
466170000 Hz
530000000 Hz
The default frequency is the first frequency programmed
into the list. Due to regulatory constraints in most
countries, frequencies can only be programmed by the
factory or service centers equipped to make this change.
Master Mode
Access points with the S-UHF option installed can operate
with Master Mode enabled or disabled. Master Mode may
improve performance in some environments. It should only
be enabled if the access point radio coverage area does not
overlap other access points operating on the same
frequency. If Master mode is disabled, this restriction does
not apply. An access point operating with Master Mode
disabled may overlap coverage areas with access points on
the same or different frequencies.
Master Mode settings are:
Enabled
Disabled