Intermec 6710 - Manual (Page 67)

6710 Access Point User’s Guide 4-1
Section 4
Configuration
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
This section describes how to:
"
Create a local DIAG port, Telnet, and Web browser
session with the access point.
"
Access the access point’s FLASH and ROM.
"
Set up the access point through its configuration
menus.
You can configure the access point locally through its DIAG
port, or remotely through Telnet or a Web browser. The
following chart shows the sessions you can use to do other
tasks.
Task DIAG Port Telnet Browser
Change configuration pass-
words Ц Ц Ц
Modify the configuration Ц Ц Ц
Upgrade FLASH Ц Ц
Check the FLASH version Ц Ц
Access ROM Ö
Check the ROM version Ö
Use online help Ц Ц Ц