Intermec 6710 - Manual (Page 183)

SECTION 5
"
Software Download
6710 Access Point User’s Guide 5-23
Viewing ROM Commands
To view ROM commands, type any invalid command (such
as “?”) to display the command monitor’s Main Menu:
B - Reboot FR - Run Flash Boot File
FX s - Ymodem File Download PWD - Password Menu
FC s - Move file to Flash NPWD - Norand Password Menu
FD - File System Directory SR z - Serial Baud Rate
ap>
The following paragraphs describe each option.
" NOTE: When executing a command that has an option (for example Fx s)
separate the option from the command by a space.
B
Reboot resets the access point’s system software. Reboot is
similar to turning the access point off (removing power),
and then starting it up again (reapplying power).
FX s
FX s performs a Ymodem batch protocol download of a file
into the specified s FLASH segment. Typing FX 1, 2, 3, or 4
(depending upon which FLASH segment you want the file
loaded to) automatically copies the file to the specified
FLASH segment.
FD
FD displays the FLASH file system directory, including
information about the boot file. See “Fd Command” on page
5-6 for more information.