PLANET XGS3-24040 - Manual (Page 60)

Chapter 4 Basic Switch Configuration
4-11
6. Configure group
Command Explanation
Global Mode
snmp-server group
{noauthnopriv|authnopriv|authpriv} [[read
] [write ] [notify
]] [access
{|}] [ipv6-access
{|}]
no snmp-server group
{noauthnopriv|authnopriv|authpriv}
[access {|}]
[ipv6-access
{|}]
Set the group information on the switch. This
command is used to configure VACM for SNMP v3.
7. Configure view
Command Explanation
Global Mode
snmp-server view
{include|exclude}
no snmp-server view
[]
Configure view on the switch. This command is used
for SNMP v3.
8. Configuring TRAP
Command Explanation
Global Mode
snmp-server enable traps
no snmp-server enable traps
Enable the switch to send Trap message. This
command is used for SNMP v1/v2/v3.
snmp-server host { |
} {v1 | v2c | {v3 {noauthnopriv
| authnopriv | authpriv}}}
no snmp-server host { |
} {v1 | v2c | {v3 {noauthnopriv
| authnopriv | authpriv}}}
Set the host IPv4/IPv6 address which is used to
receive SNMP Trap information. For SNMP v1/v2,
this command also configures Trap community
string; for SNMP v3, this command also configures
Trap user name and security level. The “no” form of
this command cancels this IPv4 or IPv6 address.
10. Enable/Disable RMON
Command Explanation
Global mode
rmon enable
no rmon enable
Enable/disable RMON.