PLANET XGS3-24040 - Manual (Page 431)

Chapter 44 IPv6 Multicast Protocol
44-29
The switch realizes the MLD Snooping function while supporting MLD v2. This way, the user can acquire IPv6
multicast with the switch.
44.7.2 MLD Snooping Configuration Task
1. Enable the MLD Snooping function
2. Configure the MLD Snooping
1. Enable the MLD Snooping function
Command Explanation
Global Mode
ipv6 mld snooping
no ipv6 mld snooping
Enable global MLD Snooping, the “no ipv6
mld snooping” command disables the
global MLD snooping.
2. Configure MLD Snooping
Command Explanation
Global Mode
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Enable MLD Snooping on specific VLAN. The “no”
form of this command disables MLD Snooping on
specific VLAN.
ipv6 mld snooping vlan <vlan-id> limit {group
<g_limit> | source <s_limit>}
no ipv6 mld snooping vlan <vlan-id> limit
Configure the number of the groups in which the MLD
Snooping can join, and the maximum number of
sources in each group. The “no” form of this command
restores to the default.
ipv6 mld snooping vlan <vlan-id>
l2-general-querier
no ipv6 mld snooping vlan <vlan-id>
l2-general-querier
Set the VLAN level 2 general querier, which is
recommended on each segment. The “no” form of this
command cancels the level 2 general querier
configuration.
ipv6 mld snooping vlan mrouter-port
interface
no ipv6 mld snooping vlan
mrouter-port interface
Configure the static mrouter port in specific vlan. The
“no” form of this command cancels the mrouter port
configuration.
ipv6 mld snooping vlan <vlan-id> mrpt <value>
no ipv6 mld snooping vlan <vlan-id> mrpt
Configure the keep-alive time of the mrouter port. The
“no” form of this command restores to the default.
ipv6 mld snooping vlan <vlan-id> query-interval
<value>
no ipv6 mld snooping vlan <vlan-id>
query-interval
Configure the query interval. The “no” form of this
command restores to the default.
ipv6 mld snooping vlan
immediate-leave
Configure immediate leave multicast group function for
the MLD Snooping of specific VLAN. The “no” form of