PLANET XGS3-24040 - Manual (Page 113)

Chapter 14 VLAN Configuration
14-2
XGS3 Switch Ethernet Ports can works in three kinds of modes: Access, Hybrid and Trunk, each mode has a
different processing method in forwarding the packets with tagged or untagged.
The ports of Access type only belongs to one VLAN, usually they are used to connect the ports of the
computer.
The ports of Trunk type allow multi-VLANs to pass, can receive and send the packets of multi-VLANs. Usually
they are used to connect between the switches.
The ports of Hybrid type allow multi-VLANs to pass, can receive and send the packets of multi-VLANs. They
can be used to connect between the switches, or to a computer of the user.
Hybrid ports and Trunk ports receive the data with the same process method, but send the data with
different method: Hybrid ports can send the packets of multi-VLANs without the VLAN tag, while Trunk ports
send the packets of multi-VLANs with the VLAN tag except the port native VLAN.
The switch implements VLAN and GVRP (GARP VLAN Registration Protocol) which are defined by 802.1Q.
The chapter will explain the use and the configuration of VLAN and GVRP in detail.
14.1.2 VLAN Configuration Task List
1. Create or delete VLAN
2. Set or delete VLAN name
3. Assign Switch ports for VLAN
4. Set the switch port type
5. Set Trunk port
6. Set Access port
7. Set Hybrid port
8. Enable/Disable VLAN ingress rules on ports
9. Configure Private VLAN
10. Set Private VLAN association
1. Create or delete VLAN
Command Explanation
Global Mode
vlan WORD
no vlan WORD
Create/delete VLAN or enter VLAN Mode
2. Set or delete VLAN name
Command Explanation
Global Mode
name
no name
Set or delete VLAN name.