PLANET XGS3-24040 - Manual (Page 158)

Chapter 17 Qos Configuration
17-7
“no class <class-map-name>”
command deletes the specified class.
set {ip dscp | ip precedence
| ipv6 dscp |
ipv6 flowlabel | ip nexthop
|cos }
no set {ip dscp | ip precedence
| ipv6 dscp |
ipv6 flowlabel | ip nexthop
| cos }
Assign a new DSCP, CoS, IP
Precedence value for the classified
traffic; the no command cancels the
newly assigned value.
policy
({conform-action
(drop | set-dscp-transmit |
set-prec-transmit |
transmit) | exceed-action (drop |
policed-dscp-transmit | transmit) } | )
no policy
({conform-action
(drop | set-dscp-transmit |
set-prec-transmit |
transmit) | exceed-action (drop |
policed-dscp-transmit | transmit)} | )
policy
(pir
| )
({conform-action (drop | set-dscp-transmit
| set-prec-transmit
| transmit)
exceed-action (drop | policed-dscp-transmit |
transmit) | violate-action (drop |
policed-dscp-transmit | transmit)} | )
no policy
(pir
| )
({conform-action (drop | set-dscp-transmit
| set-prec-transmit
| transmit)
exceed-action (drop | policed-dscp-transmit |
transmit) | violate-action (drop |
policed-dscp-transmit | transmit)} | )
The non-aggregation policer command
supporting three colors. Determine
whether the working mode of token
bucket is singe rage single bucket,
single rate single bucket, single rate
dual bucket or dual rate dual bucket, by
analyzing the parameters. The no
command will delete the mode
configuration.