PLANET XGS3-24040 - Manual (Page 311)

Chapter 39 BGP
39-5
no router bgp <as-id> <as-id>”command disenable BGP process.
Router configuration mode
network
no network
Set the network that BGP will announce, the no
network command cancels the
network that will be announced.
2. Configure BGP Neighbors
Command Explanation
Router configuration mode
neighbor {|}
remote-as
no neighbor {|}
[remote-as ]
Specify a BGP neighbor, the no neighbor
{|} [remote-as
] command deletes the neighbor.
3. Administrate the change of routing policy
（1）Configure hard reconfiguration.
Command Explanation
Admin Mode
clear ip bgp {<*>|<as-id>|
external|peer-group
<NAME>|<ip-address>}
Configure hard reconfiguration.
（2） Configure outbound soft reconfiguration.
Command Explanation
Admin Mode
clear ip bgp {<*>|<as-id>|
external|peer-group
|<ip-address>} soft out
Configure outbound soft reconfiguration.
（3）Configure inbound soft reconfiguration.
Command Explanation
BGP configuration mode
neighbor { <ip-address> | }
soft-reconfiguration inbound
no neighbor { <ip-address> | }
soft-reconfiguration inbound
This command can store routing
information from neighbors and
peers; the no neighbor
{ <ip-address> | }
soft-reconfiguration inbound
command cancels the storage of
routing information.
Admin Mode