PLANET XGS3-24040 - Manual (Page 56)

Chapter 4 Basic Switch Configuration
4-7
The communication between NMS and Agent functions in Client/Server mode by exchanging standard
messages. NMS sends request and the Agent responds. There are seven types of SNMP message:

Get-Request

Get-Response

Get-Next-Request

Get-Bulk-Request

Set-Request

Trap

Inform-Request
NMS sends queries to the Agent with Get-Request, Get-Next-Request, Get-Bulk-Request and Set-Request
messages; and the Agent, upon receiving the requests, replies with Get-Response message. On some
special situations, like network device ports are on Up/Down status or the network topology changes, Agents
can send Trap messages to NMS to inform the abnormal events. Besides, NMS can also be set to alert to
some abnormal events by enabling RMON function. When alert events are triggered, Agents will send Trap
messages or log the event according to the settings. Inform-Request is mainly used for inter-NMS
communication in the layered network management.
USM ensures the transfer security by well-designed encryption and authentication. USM encrypts the
messages according to the user typed password. This mechanism ensures that the messages can’t be
viewed on transmission. And USM authentication ensures that the messages can’t be changed on
transmission. USM employs DES-CBC cryptography. And HMAC-MD5 and HMAC-SHA are used for
authentication.
VACM is used to classify the users’ access permission. It puts the users with the same access permission in
the same group. Users can’t conduct the operation which is not authorized.