PLANET XGS3-24040 - Manual (Page 316)

Chapter 39 BGP
39-10
neighbor peer-group
no neighbor peer-group
Make a neighbor a member of the peer group.
The no neighbor peer-group
command cancels the specified
member.
7．Configure neighbors and peer Groups’ parameters
Command Explanation
BGP configuration mode
neighbor { | } remote-as
no neighbor { | } remote-as
Specify a BGP neighbor; format “no”
of the no neighbor { |
} remote-as
command deletes the neighbor.
neighbor { | } description
<.LINE>
no neighbor { | }
description
Associate a description with a
neighbor; the no neighbor
{ | }
description command deletes this
description.
neighbor { | }
default-originate [route-map ]
no neighbor { | }
default-originate [route-map ]
Permit to send the default route
0.0.0.0; the no neighbor
{ | }
default-originate [route-map
] command cancels
sending default route.
neighbor { | }
send-community
no neighbor { | }
send-community
Configure the community attributes
sent to the neighbor.
neighbor { | } timers
alive>
no neighbor { | } timers
Configure a particular neighbor’s
keep-alive and hold-time timer; the
no neighbor { |
} timers command recovers
the default value.
neighbor { | }
advertisement-interval
no neighbor { | }
advertisement-interval
Configure the min interval of
sending BGP routing information;
the no neighbor { |
} advertisement-interval
command recovers the default
value.
neighbor { | } ebgp-multihop
[<1-255>]
no neighbor { | }
ebgp-multihop
Configure the allowance of EBGP
connections with networks
connected indirectly; the no
neighbor { | }
ebgp-multihop command cancels