PLANET XGS3-24040 - Manual (Page 474)

Chapter 47 802.1x Configuration
47-14
2. Configure Web authentication agent function
Command Explanation
Global Mode
dot1x web authentication
enable
no dot1x web authentication
enable
Enable Web authentication agent, the no command
disable Web authentication agent.
dot1x web redirect
no dot1x web redirect
Set the HTTP server address for Web redirection, the no
command clears the address.
3. Access management unit property configuration
1) Configure port authentication status
Command Explanation
Port Mode
dot1x port-control
{auto|force-authorized|force-
unauthorized }
no dot1x port-control
Sets the 802.1x authentication mode; the no command
restores the default setting.
2) Configure port access management method
Command Explanation
Port Mode
dot1x port-method
{macbased | portbased
|webbased|userbased
advanced}
no dot1x port-method
Sets the port access management method; the no
command restores MAC-based access management.
dot1x max-user macbased
no dot1x max-user
macbased
Sets the maximum number of access users for the
specified port; the no command restores the default setting
of allowing 1 user.
dot1x max-user userbased
no dot1x max-user
userbased
Set the upper limit of the number of users allowed
accessing the specified port, only used when the access
control mode of the port is userbased; the no command is
used to reset the limit to 10 by default.
dot1x guest-vlan
no dot1x guest-vlan
Set the guest vlan of the specified port; the no command is
used to delete the guest vlan.