PLANET XGS3-24040 - Manual (Page 208)

Chapter 28 DHCP Configuration
27-2
ipv6 nd snooping user-control
no ipv6 nd snooping user-control
Enable or disable ND Snooping in a
port.
2. Configure the lifetime of ND Snooping
Command Explanation
Global mode
[no] ipv6 nd snooping max-sac-lifetime
Reset the binding lifetime as
<max-sac-lifetime> or 2 hours for
SAC_BOUND.
[no] ipv6 nd snooping max-dad-delay
Reset the binding lifetime as
<max-dad-delay> or 1 second for
SAC_START.
[no] ipv6 nd snooping max-dad-prepare-delay
Reset the binding lifetime as
<max-dad-prepare-delay> half a
second for SAC_QUERY.
3. The binding function of ND Snooping
Command Explanation
Global mode
[no] ipv6 nd snooping policy
{bind-eui64-address |
bind-non-eui64-address}
Configure the dynamic binding policy
of ND Snooping address.
ipv6 nd snooping static-binding
hardware-address
> interface
no ipv6 nd snooping static-binding
Add a static binding.
ipv6 nd snooping mac-binding-limit
no ipv6 nd snooping mac-binding-limit
Configure the max number of IPv6
addresses that can be bound to the
same MAC address.
Port mode
ipv6 nd snooping port-binding-limit
no ipv6 nd snooping port-binding-limit
Set the binding number for the ports.
The binding number only limits the
dynamic binding number of the ports,
do not limit the static binding number
of the ports.
Admin mode
clear ipv6 nd snooping binding
[]
Clear all static binding of ND
Snooping.