PLANET XGS3-24040 - Manual (Page 128)

Chapter 14 VLAN Configuration
14-17
1. Configure the MAC-based VLAN function on the port
Command Explanation
Port Mode
switchport mac-vlan enable
no switchport mac-vlan enable
Enable/disable the MAC-based VLAN
function on the port.
2. Set the VLAN to MAC VLAN
Command Explanation
Global Mode
mac-vlan vlan <vlan-id>
no mac-vlan
Configure the specified VLAN to MAC
VLAN; the “no mac-vlan” command
cancels the MAC VLAN configuration of
this VLAN.
3. Configure the correspondence between the MAC address and the VLAN
Command Explanation
Global Mode
mac-vlan mac vlan
priority
no mac-vlan {mac |all}
Add/delete the correspondence between
the MAC address and the VLAN, namely
specified MAC address join/leave
specified VLAN.
4. Configure the IP-subnet-based VLAN function on the port
Command Explanation
Port Mode
switchport subnet-vlan enable
no switchport subnet-vlan enable
Enable/disable the port IP-subnet-base
VLAN function on the port.
5. Configure the correspondence between the IP subnet and the VLAN
Command Explanation
Global Mode
subnet-vlan ip-address
mask vlan
priority
no subnet-vlan {ip-address
mask |all}
Add/delete the correspondence between
the IP subnet and the VLAN, namely
specified IP subnet joins/leaves specified
VLAN.