PLANET XGS3-24040 - Manual (Page 213)

Chapter 28 DHCP Configuration
28-7
dns-server
[[[…
]]]
no dns-server
Configure DNS server for DHCP clients. The
no command deletes DNS server
configuration.
domain-name
no domain-name
Configure Domain name for DHCP clients;
the “no domain-name” command deletes
the domain name.
netbios-name-server
[[[…
]]]
no netbios-name-server
Configure the address for WINS server. The
no operation cancels the address for server.
netbios-node-type
{b-node|h-node|m-node|p-node|
umber>}
no netbios-node-type
Configure node type for DHCP clients. The
no operation cancels the node type for
DHCP clients.
bootfile
no bootfile
Configure the file to be imported for DHCP
clients on boot up. The no command
cancels this operation.
next-server
[[[…
]]]
no next-server
[[[…
]]]
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
option {ascii | hex
| ipaddress }
no option
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated
to addresses in the address pool.
Global Mode
ip dhcp excluded-address
[]
no ip dhcp excluded-address
[]
Exclude the addresses in the address pool
that are not for dynamic allocation.
(3) Configure manual DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
hardware-address
[{Ethernet | IEEE802|}]
no hardware-address
Specify/delete the hardware address
when assigning address manually.