PLANET XGS3-24040 - Manual (Page 517)

Chapter 56 RSPAN Configruation
56-3
1. Configure RSPAN VLAN
Command Explanation
VLAN Configuration Mode
remote-span
no remote-span
To configure the specified VLAN as
RSPAN VLAN. The no command will
remove the configuration of RSPAN
VLAN.
2. Configure mirror source port (CPU)
Command Explanation
Global Mode
monitor session source
{interface | cpu [slot
]} {rx| tx| both}
no monitor session source
{interface | cpu [slot
]}
To configure mirror source port; The no
command deletes the mirror source port.
3. Configure mirror destination port
Command Explanation
Global Mode
monitor session destination
interface
no monitor session destination
interface
To configure mirror destination interface;
The no command deletes the mirror
destination port.
4. Configure reflector port
Command Explanation
Global Mode
monitor session reflector-port
no monitor session reflector-port
To configure the interface to reflector
port; The no command deletes the
reflector port.
5. Configure remote VLAN of mirror group
Command Explanation
Global Mode
monitor session
remote vlan
no monitor session <.session> remote vlan
To configure remote VLAN of mirror
group, the no command deletes the
remote VLAN of mirror group.