PLANET XGS3-24040 - Manual (Page 107)

Chapter 12 Port Channel Configuration
12-4
2. Add physical ports to the port group
Command Explanation
Port Mode
port-group mode
{active | passive | on}
no port-group
Adds ports to the port group and sets their
mode.
3. Enter port-channel configuration mode.
Command Explanation
Global Mode
interface port-channel
Enters port-channel configuration mode.
4. Set load-balance method for Port-group
Command Explanation
Aggregation port configuration mode
load-balance {src-mac | dst-mac |
dst-src-mac | src-ip | dst-ip | dst-src-ip}
Set load-balance for port-group.
5. Set the system priority of LACP protocol
Command Explanation
Global mode
lacp system-priority
no lacp system-priority
Set the system priority of LACP protocol,
the no command restores the default value.
6. Set the port priority of the current port in LACP protocol
Command Explanation
Port mode
lacp port-priority
no lacp port-priority
Set the port priority in LACP protocol. The
no command restores the default value.