Yaskawa FSP Amplifier - Manual (Page 351)

FSP Amplifier User’s Manual Appendix D: List of Parameters
D-6
Pn511
Reserved parameter (Do not
change).
— — — —
Sequence
Parameters
Pn512*
Reserved parameter (Do not
change.)
— — — —
Pn580 Zero clamp level mm / s 0-5000 10 —
Pn581 Motion detection level mm / s 1-5000 20 —
Pn582
Speed coincidence signal output
width
mm / s 0-5000 10 —
Linear
Mo
tor
Sequen
ce
Param
eters
Pn583
Brake reference output speed
level
mm / s 0-5000 100 —
Pn600
Regenerative Resistor
Capacity**
10 W
0 to
capacity ***
0 5.6.1
O
ther
Para-
meter
s
Pn601
Reserved parameter (Do not
change.)
— — — —
*
After changing this parameter, cycle the main circuit and control power supplies to enable the new settings.
** Normally set to "0". When using an external regenerative resistor, set the capacity (W) of the regenerative resistor.
*** The upper limit is the maximum output capacity (W) of the servo amplifier.