Yaskawa FSP Amplifier - Manual (Page 217)

FSP Amplifier User’s Manual Chapter 7: Using the Panel Operator
7-26
7.2.6. Checking the Motor Model
Set the function Fn011 to select the Motor Model Check mode. This mode
is used for motor maintenance and can also be used to check the special (Y-
specification) codes of the servo amplifiers.
Follow the procedure below to check the motor model.
1. Press the MODE/SET key to select the Auxiliary Function mode.
2. Press the Up Arrow or Down Arrow key to select the function Fn011.
3. Press the DATA/SHIFT key for a minimum of one second to display
the servomotor model and voltage code.
Voltage Model
Voltage Servomotor Model
Code Voltage Code Servomotor Model
00 100 VAC or 140 VDC 00 SGMAH
01 200 VAC or 280 VDC 01 SGMPH
02 400 VAC or 560 VDC 02 SGMSH
03 SGMGH- A (1500 rpm)
04 SGMGH- B (1000 rpm)
05 SAGMDH
06 SGMUH
4. Press the MODE/SET key to display the Servomotor capacity.
Capacity: Displayed value x10 (W)
In this example, the capacity is 100W.