Yaskawa FSP Amplifier - Manual (Page 167)

FSP Amplifier User’s Manual Chapter 5: Parameter Settings and Functions
5-100
5.10. Auto Running a User Program
After downloading a user program to the driver, it is possible to run it
automatically every time the driver turns ON, by setting the parameter Pn2CC to
the program label number which the program start with. With the default setting
0 the program auto running is disabled.
Parameter Setting (LABEL) Results
Pn2CC
Range: 0 to 99
Default setting: 0
(auto run disabled) Starts user program automatically at
settled label when turning ON FSP
Amplifier’s power.