Yaskawa FSP Amplifier - Manual (Page 339)

FSP Amplifier User’s Manual Appendix C: Specifications for Peripheral Devices
C-8
C.8. Absolute Encoder Battery
When the power supply of an absolute encoder is OFF, a data backup battery is
required. Customers can install one of the absolute encoder batteries shown
below.
„ Battery Installed on the Absolute Encoder Cable Adapter
Model: JZSP-BA01 (Lithium battery assembly shown below)
Battery: ER3V manufactured by Toshiba Battery Co. Ltd.
3.6 V 1000 mAh
„ Battery Installed on the Sigma FSP (CN1 Connector)
Model: JZSP-BA01 (Lithium battery assembly shown above) or
JZSP-BA01-1 (Lithium battery assembly shown below)
Battery: ER3V manufactured by Toshiba Battery Co., Ltd.
3.6 V 1000 mAh
To connect the battery to CN1, cut off the connector near the edge of the
connector, and strip 5 to 6 mm of insulation from the wires.
Next, connect the two wires to the contacts for CN1 according to the chart
and diagram below.
Contact No. Contact Name Color
21 Battery + Red
22 Battery – Black
↕P represents twisted pair.