Yaskawa FSP Amplifier - Manual (Page 322)

FSP Amplifier User’s Manual Appendix B: Special Wiring
B-7
„ Using Noise Filters
Use a noise suppression filter to prevent noise generated by the power
supply line. Install a noise filter on the power supply line for peripheral
equipment as necessary.
The following table recommends noise filters for each servo amplifier
model.
Recommended Noise Filter
Voltage
Servo Amplifier Model
FSP- Model Manufacturer
A3B* to 01B* FN2070-6/07 or FS5827-4-07 Single-phase
100 V
02B* FN2070-10/07
A3A* to 02A*
FN2070-6/07 or FS5827-4-07 Single-phase
200 V
04A* FN2070-10/07 or FS5827-7-07
08A* FN2070-16/07 or FS5827-15-07 Single-phase
220 V
15A* FN350-30/33 or FS5827-25-07
10A* and 20A* FN258L-7/07 Three-phase
200 V
30A FN258L-30/07
05D* to 15D*
FN258L-7/07 or FS5826-6-07
20D* and 30D* FN258L-16/07 or FS5826-10-07
Three-phase
400 V
50D* FS5559-35-33 or FS5826-20-07
Schaffner