H3C Technologies H3C SR8800 - Manual (Page 41)

30
Task Command Remarks
Display information about LSPs.
display mpls lsp [ incoming-interface
interface-type interface-number ]
[ outgoing-interface interface-type
interface-number ] [ in-label in-label-value ]
[ out-label out-label-value ] [ asbr |
[ vpn-instance vpn-instance-name ] [ protocol
{ bgp | bgp-ipv6 | crldp | ldp | rsvp-te |
static | static-cr } ] ] [ egress | ingress |
transit ] [ { exclude | include } dest-addr
mask-length ] [ verbose ] [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display LSP statistics.
display mpls lsp statistics [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display the BFD detection
information for an LSP.
display mpls lsp bfd [ ipv4
destination-address mask-length ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about the
NHLFE table.
display mpls nhlfe [ token ] [ verbose ] [ slot
slot-number ] [ include text | { | { begin |
exclude | include } regular-expression } ]
Available in any view
Display usage information about
the NHLFE entries.
display mpls nhlfe reflist token [ slot
slot-number ] [ include text | { | { begin |
exclude | include } regular-expression } ]
Available in any view
Display information about static
LSPs.
display mpls static-lsp [ lsp-name lsp-name ]
[ { include | exclude } dest-addr mask-length ]
[ verbose ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about LSPs
over specified or all routes for the
public or a specific private
network.
display mpls route-state [ vpn-instance
vpn-instance-name ] [ dest-addr mask-length ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display MPLS statistics for a
specific or all LSPs.
display mpls statistics lsp { index | all | name
lsp-name } [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display MPLS statistics for a
specific or all interfaces.
display mpls statistics interface
{ interface-type interface-number | all } [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Displaying MPLS LDP operation
Task Command Remarks
Display information about LDP.
display mpls ldp [ all [ verbose ] [ | { begin |
exclude | include } regular-expression ] ]
Available in any view
Display the label advertisement
information of the specified FEC.
display mpls ldp fec [ vpn-instance
vpn-instance-name ] dest-addr mask-length [ |
{ begin | exclude | include }
regular-expression ]
Available in any view