H3C Technologies H3C SR8800 - Manual (Page 267)

256
Step Command Remarks
13. Enable route reflection
between clients.
reflect between-clients
Optional.
Enabled by default.
14. Specify the cluster ID of the
RR.
reflector cluster-id { cluster-id |
ip-address }
Optional.
Router ID of an RR in the cluster by
default.
15. Create an RR reflection policy. rr-filter
extended-community-list-number
Optional.
NOTE:
For information about BGP-L2VPN address family and VPLS address family, see MPLS Command
Reference.
Configuring specific routing features for BGP-VPNv4 subaddress family
To configure specific routing features for BGP-VPNv4 subaddress family:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Configure the remote PE as
the peer. peer ip-address as-number
as-number
N/A
4. Specify the interface for TCP
connection. peer ip-address connect-interface
interface-type interface-number
N/A
5. Enter BGP-VPNv4 subaddress
family view.
ipv4-family vpnv4 N/A
6. Set the default value of the
local preference.
default local-preference value
Optional.
100 by default.
7. Set the default value for the
system MED.
default med med-value
Optional.
By default, the default value of the
system MED is 0.
8. Filter all or certain types of
routes to be advertised.
filter-policy { acl-number |
ip-prefix ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id | static ]
Optional.
By default, BGP does not filter
routes to be advertised.
9. Filter received routes.
filter-policy { acl-number |
ip-prefix ip-prefix-name } import
Optional.
By default, BGP does not filter
received routes.
10. Advertise community
attributes to a peer or peer
group.
peer { group-name | ip-address }
advertise-community
Optional.
By default, no community attributes
are advertised to any peer or peer
group.
11. Filter routes received from or
to be advertised to a peer or
peer group based on an
AS_PATH list.
peer { group-name | ip-address }
as-path-acl as-path-filter-number
{ import | export }
Optional.
By default, no AS filtering list is
applied to a peer or peer group.